Halcyon Technology PLC.SET: HTECH🇹🇭 TH

Business Operation · 2025

Corporate Information

Company Name

Halcyon Technology PLC.

Telephone

0-2906-3250

Website

www.halcyon.co.th

Email

info@halcyon.co.th

Dividend Policy

Dividend Policy

The Company has a policy to pay dividends to shareholders at least twice a year at the rate of not less than 40% of the net profit after deduction of corporate income tax and reserves according to the law. However, the Company may pay out dividend at the rate lower than mentioned above if it is necessary for the Company to use such net profit for expansion of business.

Historical Dividend Payments

This YearLast Year2 Years Ago3 Years Ago4 Years AgoMetricDescriptionRemark
0.110.380.110.330.45Net profit per share (Baht : Share)Net profit per share (baht : share)
0.170.160.050.140.19Dividend per share (Baht : Share)Dividend per share (baht : share)
In 2025, an Interim dividend of 0.07 baht per share was paid on 12 September 2025 and the Board of Directors’ Meeting No. 1/2026 has approved additional dividend for the 2025 operating results of 0.10 baht per share to be paid on 20 May 2026 (pending approval from shareholders’ meeting).
000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
00000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
0.170.160.050.140.19Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
148.4442.2544.9340.842.13Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)

Major Shareholders

Introduction

List of shareholders as of 20 March 2026

Major Shareholders

No.NameShares% Shares
35,075Mr. Pete Rimchala25,570,5008.52
35,076Mr. Vitid Pongpirodom14,912,4004.97
35,077Mr. Prasit Rakthaisaentawee14,457,4004.82
35,078Ms. Petra Rimchala12,068,2004.02
35,079Mr. Chris Rimchala11,890,0003.96
35,080Ms. Joyce Rimchala11,100,0003.7
35,081Mr. Viboon Rujireksathorn9,900,0003.3
35,082Thai NVDR Company Limited9,087,6973.03
35,083Mrs. Jarudsri Pongpirodom6,472,6002.16
35,084Mr. Chua Cheng Khuan6,100,0002.03
35,085Mr. Norawee Changlum5,666,7001.89
35,086Mr. Rattipat Aramwatanapong5,000,0001.67
35,087Mr. Jakrin Bunditchon4,194,0001.4
35,088Mrs. Sirirat Siripattanakul3,900,0001.3
35,089Mr. Pravit Kobkulsuwan3,897,2001.3
35,090Mr. Prasobsook Siripatanakul3,300,0001.1
35,091Ms. Charuwan Sapsaming3,017,4001.01
35,092Mr. Mawin Supradit Na Ayudhaya2,663,5000.89
35,093Mr. Thammasak Anudit2,658,9000.89
35,094Mr. Suwan Aramwatanapong2,575,0000.86
35,095Mr. Soraphan Songsermpong2,310,0000.77
35,096Mr. Pongpakorn Wisahapanich2,300,0000.77
35,097Mr. Prapun Jiwattanasuk2,027,0000.68
35,098Mrs. Chanyanat Panterdthai1,756,3000.59
35,099Mr. Vishit Suradinkura1,700,0000.57
35,100Mr. Nakorn Harnkraiwilai1,700,0000.57
35,101Mrs. Phabmanee Darda1,660,8000.55
35,102Mr. Santpal Silpchaowala1,600,0000.53
35,103Mr. Viroj Khongkanan1,600,0000.53

Business Strategies Overview

Vision

The company envisions becoming a market leader in metal cutting tools in Thailand and the ASEAN region, as well as expanding its network to other countries worldwide. This is particularly true for customized PCD, SCD, PCBN, and carbide cutting tools, as well as high-precision parts. The company recognizes growth opportunities and aims to expand its product distribution and services within the customer's industrial sectors. Consequently, the company continuously improves and develops its strategies and work processes to comprehensively meet customer needs. This approach will enable the company to achieve sustainable growth in the future.

Objectives

  • Continuously research, develop, and manufacture new products that can support the diverse needs of the market in all industries that require cutting tools, with an emphasis on workpiece quality with accuracy and precision.

  • Increase the company's revenue every year by expanding the customer base both domestically and overseas for the company's core business, as well as look for new business opportunities that will help the company's revenue grow in the future.

  • Increase market share for Customized PCD, SCD, PCBN, and Carbide Cutting Tools products in the electronics component manufacturing, automotive and aerospace parts manufacturing, medical device parts manufacturing, machinery parts manufacturing, and other industries.

  • Reduce production costs to increase competitiveness by improving the production process from a manual system to a semi-automated and fully automated system, respectively.

  • Continuously develop personnel and promote new generations of personnel with knowledge and abilities to keep up with the changing manufacturing technology.

Goals

In 2026, the company aims to achieve revenue growth of approximately 7% from the previous year, with the following key factors supporting growth:

  • Continued expansion of the Hard Disk Drive (HDD) / Digital Storage Industry customer, with rapidly increasing demand from Data Centers to support the developments of AI, automation systems and various cloud services.

  • Offering products in the form of an Intelligent Inventory Management System (iiMS) project, which is an integrated warehouse management system for customers through vending machines; resulting in an increase in the types of products sold in addition to cutting tools. It will cover all consumables used in manufacturing plants.

  • Broadening the Standard Cutting Tools product range, as well as setting up central warehouse to increase competitiveness and provide more comprehensive service solutions.

  • Penetrating new customer base from subsidiaries both domestically and overseas, and increased production capacity from the installation of machinery to develop the production process.

Business Strategies

The company's business strategy focuses on providing a comprehensive service to customers; from tool design, and high-precision quality inspection, to working closely with customers to quickly resolve application issues, and helping them improve production processes and reduce production costs.

Material Changes & Developments

Material Changes & Developments

YearDescription
2,002

Halcyon Technology Company Limited was registered with a registered capital of 3 million baht, with 1.5 million baht paid up. The number of shares is 30,000 shares, with a par value of 100 baht per share. The office is located at 41 Moo 14, Bang Chan Industrial Estate, Soi 6, Serithai Road, Minburi Subdistrict, Minburi District, Bangkok. Subsequently, the remaining registered capital of 1.5 million baht was paid up, resulting in a total paid-up registered capital of 3 million baht.

2,004

The company increased its registered and paid-up capital to 12 million baht to expand production capacity and for working capital.

2,005

The company increased its registered and paid-up capital to 17 million baht to expand production capacity and for working capital.

2,007

The company increased its registered and paid-up capital to 179,253,400 Baht to restructure the company group and shareholder groups, which was agreed upon by the company's shareholders, divided into

- Increased capital by 50,000,000 Baht (500,000 shares) in exchange for shares of Halcyon Metal Co., Ltd. from existing shareholders at a ratio of 1:1, which is close to the book value of Halcyon Technology Co., Ltd. and Halcyon Metal Co., Ltd. at that time.

- Increased capital by 112,253,400 Baht (1,112,534 shares) to offer to the company's shareholders according to the shareholding restructuring plan, in which Halcyon Metal Co., Ltd. did not increase capital proportionally.

2,008

Halcyon Metal Co., Ltd. sold its shares in the Company to the Company's shareholders at a price of 101 baht per share, which is the book value of the Company, in order to manage cross-shareholdings between the two companies. Subsequently, on May 14, 2008, Halcyon Technology Co., Ltd. was registered as a public company by changing its par value from 100 baht per share to 1 baht per share. and increased its registered capital from 179,253,400 baht to 240,000,000 baht to offer 60,746,600 newly issued ordinary shares with a par value of 1 baht per share to the public.

2,009

The Company has approved the change of the number of newly issued ordinary shares offered to the public from 60,746,600 shares to 40,746,600 shares with a registered capital after this offering of 220 million baht (par value of 1 baht per share) and the Company's securities commenced trading on the Market for Alternative Investment (mai) on March 27, 2009. Subsequently, the Company approved the offering of 20 million shares from the unpaid registered capital to be offered to private placement investors.

2,010

The Company has invested in the establishment of Halcyon Technology (Philippines) Inc. in the Philippines with a registered capital of PHP 145 million (PHP 58 million paid-up). The Company holds a 65% stake in the paid-up registered capital, representing an investment value of 26.26 million baht.

2,010

The Company has invested in a joint venture to establish Haltek Co., Ltd. with a registered capital of 10 million baht (7 million baht paid-up). The Company holds a 70% stake in the paid-up registered capital, representing an investment value of 4.9 million baht. The joint venture aims to distribute standard carbide cutting tools.

2,010

The company increased its registered capital to 240 million baht, with a paid-up registered capital of 240 million shares. Subsequently, the newly issued ordinary shares commenced trading on the Market for Alternative Investment (mai).

2,011

Halcyon Technology PLC. and Halcyon Metal Co., Ltd. received ISO 9001:2008 certifications.

2,011

Haltek Co., Ltd. increased its paid-up capital from 7 million baht to 10 million baht.

2,012

The Company increased its registered capital from 240 million baht to 300 million baht (paid-up capital of 240 million baht) to support the exercise of warrants to purchase the Company's shares to be issued to directors who are executives and/or employees of the Company and its subsidiaries, to pay for the investment in ordinary shares of FDM Technology Company Limited, and to offer for sale to persons in a limited circle. Subsequently, the Company increased its paid-up capital to 255.5 million baht from the investment in ordinary shares of FDM Technology Company Limited in the proportion of 60% to expand its customer base and distribution channels. The Company issued newly issued ordinary shares in exchange for ordinary shares of FDM Technology Company Limited from the existing shareholders, and FDM Technology Company Limited increased its registered and paid-up capital to 10 million baht.

2,012

Haltek Co., Ltd. was dissolved due to a conflict of interest with FDM Technology Co., Ltd. as both companies sold the same type of products. The company completed its liquidation on December 27, 2005.

2,012

FDM Technology Public Company Limited has invested in the establishment of PT HTECH Indonesia in Indonesia, holding an 80% stake in the registered capital of USD 300,000 to expand its customer base and distribution channels in Indonesia.

2,013

The Company has co-invested to establish Halcyon Technology (Vietnam) Co., Ltd. in Vietnam with a registered capital of VND 2,000 million (VND 700 million paid up). The Company holds 70% of the total ordinary shares, representing an investment value of 0.74 million Baht, to expand its customer base and distribution channels in Vietnam.

2,013

The Company has invested in Halcyon Technology (M) Sdn. Bhd. in Malaysia, holding a 60% stake in the total common shares to expand its customer base and distribution channels in Malaysia.

2,013

The Company has invested in Halcyon Technology Singapore Pte. Ltd. in Singapore. The Company holds a 70% stake in the registered and paid-up capital of SGD 825,000 to expand its customer base and distribution channels in Singapore.

2,013

The Company resolved to offer for sale no more than 39.5 million newly issued shares (with a par value of 1 baht per share) to private placement investors. The shares were allocated to 2 private placement investors, totaling 4,317,020 shares.

2,014

Halcyon Technology (Vietnam) Co., Ltd. increased its paid-up capital to VND 2,000; and the Company invested to increase its shareholding to 85% of the total ordinary shares, representing a total investment value of 2.77 million baht.

2,015

FDM Technology Public Company Limited has sold 10% of its shares in PT HTECH Tools Indonesia to another co-founder, resulting in a reduced ownership stake to 70%.

2,016

The company has resolved to reduce the registered capital from 300,000,000 Baht to be equal to the paid-up capital of 260,804,340 Baht, with a par value of 1 Baht per share; and increase the registered capital by 39,196,000 Baht to be offered to private placement investors. This will increase the paid-up registered capital to 300,000,340 Baht, with a par value of 1 Baht per share. The objective of the capital increase is to expand production capacity.

2,016

FDM Technology Co., Ltd. has invested in the establishment of Halcyon Tools & Engineering Co., Ltd., with a registered capital of 2 million baht, holding 90% of the total ordinary shares. The company is located in Chonburi province to support customers in the eastern region.

2,017

The listed securities of Halcyon Technology Public Company Limited (“HTECH”) have moved to trading on the Stock Exchange of Thailand, with ordinary shares classified under the Industrials sector, Industrial Materials & Machinery industry group.

2,017

Halcyon Technology (Vietnam) Co., Ltd. increased its registered and paid-up capital from VND 2,000 million to VND 26,970 million to expand its branches and establish a manufacturing plant in Hanoi.

2,018

Halcyon Technology (Vietnam) Co., Ltd. increased its registered and paid-up capital from VND 26,970 million to VND 28,991 million. The company holds an 85% stake.

2,018

FDM Technology Co., Ltd. has sold a 10% stake in PT HTECH Tools Indonesia to another co-founder, reducing its shareholding to 60%.

2,019

FDM Technology Co., Ltd. has sold 20% of its shares in Halcyon Tools & Engineering Co., Ltd. to Mr. Kridsana Wattanasiri (existing shareholder), resulting in a remaining shareholding of 70%.

2,020

FDM Technology Co., Ltd. acquired a 10% stake in PT HTECH Tools Indonesia from another co-founder, bringing its total shareholding to 70% of the USD 1.2 million paid-up registered capital.

2,020

The Company has acquired 80% of the total common shares of Master Carbide Tools Company d/b/a Mastertech Diamond Products Company in the United States from the original founder to expand marketing channels and increase production capacity to meet the needs of customers in the United States and neighboring countries.

2,023

The Company has acquired an additional 20% of the total ordinary shares of Mastertech Diamond Products Company, increasing its shareholding from 80% to 100%.

2,023

Halcyon Technology (Vietnam) Co., Ltd. increased its registered and paid-up capital from VND 28,991 million to VND 36,000 million; and the Company invested an additional VND 9.11 million, increasing its shareholding from 85% to 86%.

Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

No

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

No

Group Operating-Structure Policy

Description

After the Company’s initial public offerings and started trading in the Market for Alternative Investment (mai) in 2009 and moved to trade in the Stock Exchange of Thailand (SET) in 2017, the Company continuously expanded its business both domestically and overseas. Currently, the Company has 3 subsidiaries in Thailand and 7 subsidiaries overseas in the Philippines, Singapore, Malaysia, Vietnam, Indonesia, and USA. The Company and its subsidiaries segment its business operations by the type of business according to the products manufactured and/or traded, and by geography. Since the Company has customer base in various countries, the Company sets up subsidiaries as authorized distributors of its products to effectively serve the customers’ needs.

Companies Where the Company Holds ≥10%

Companies (≥10% Holding)

Company NameAddressProvinceZip CodeTelephoneFaxBusiness TypeSecurity TypeSharesPaid-up Shares
Halcyon Metal Co., Ltd.41 Moo 14 Bangchan Industrial Estate Soi 6, Serithai Road, MinburiBangkok1051002-906-3254-Manufacturing, customized production and distribution of metal fabricated products including Cutting Tool Holders. Jigs & Fixtures, and other High Precision PartsCommon shares50,000,00050,000,000
FDM Technology Co., Ltd.888/3 Srinakarintara Rd. Pattanakarn Sub-District, Suan Luang District,Bangkok1025002-347-6255 02-347-6256Distribution of cutting tools in ThailandCommon shares1,000,0001,000,000
Halcyon Tools and Engineering Co., Ltd.303/14 Moo 3, Bowin Sub-District, Sriracha DistrictChonburi20230038350723-Distribution of cutting tools in the Eastern Region of Thailand and nearby provincesCommon shares20,00020,000
Mastertech Diamond Products Co.3529 Lane Road Ext., Perry, Ohio, USA 44081+1 (888) 226 5550, +1 (440) 352 1112 +1 (440) 352 1113Manufacturing and distribution of customized PCD and PCBN cutting tools in USA and nearby countriesCommon shares100100
Halcyon Technology Vietnam Co., Ltd.6th Floor, Smart Building, 793/49/1 Tran Xuan Soan Street, Tan Hung Ward, District 7, Ho Chi Minh City, Vietnam+84 (8) 3771 6497+84 (8) 3771 6497Manufacturing and distribution of customized PCD and carbide cutting tools, and distribution of standard cutting tools in VietnamCommon shares36,000,000,00036,000,000,000
Halcyon Technology (Philippines) Inc.Blk 102 Lot 22 Phase 5, 19 Orange Street Laguna, Bel Air II Don Jose, Santa Rosa, Laguna, Philippines+63 (49) 502 2295+63 (49) 502 2296Distribution of customized PCD and Carbide Cutting Tools and distribution of other Standard Cutting Tools in the Philippines.Common shares145,00058,000
Atek Precision Tools Inc. CJRS Parkview Bldg. Level 2 Rodeo Drive Laguna Bel-Air 2 Santa Rosa, Laguna +60 (049) 544-05-20Distribution of standard cutting tools in the PhilippinesCommon shares10,00010,000
Halcyon Technology Singapore Pte. Ltd.114 Lavender Street, #05-84, CT Hub 2, Singapore 338729+65 6841 3900+65 6841 3906Distribution of cutting tools in SingaporeCommon shares825,000825,000
Halcyon Technology (M) Sdn. Bhd. Block A-6-11, Ativo Plaza, No. 1, Jalan PJU 9/1, Damansara Avenue, PJU 9, Bandar Sri Damansara, Kuala Lumpur, Malaysia 52200+60 (3) 6263 0313 +60 (3) 6263 4550Distribution of cutting tools in MalaysiaCommon shares5,000,0002,021,250
PT HTECH Tools IndonesiaMitra Sunter Boulevard Blok B No. 18, Jl. Yos Sudarso Kav.89, Jakarta Utara 14350 Indonesia+62 21 6530 6109 Distribution of cutting tools in IndonesiaCommon shares12,00012,000

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

No

Relationships Among Major Shareholders

Relationship Exists (Y/N)

No

Shareholders' Agreement

Agreement Exists (Y/N)

No

Shareholding Diagram (Group Structure)

Does the company hold shares in other companies?

Yes

Subsidiaries

Company NameJuristic Persons / Holders
Halcyon Metal Co., Ltd.HALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
FDM Technology Co., Ltd.HALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 60.0 · Shareholding proportion percent: 60.0 · Mr. Suwan Aramwatanapong · Voting rights percent: 30.0 · Shareholding proportion percent: 30.0 · Mr. Rattipat Aramwatanapong · Voting rights percent: 10.0 · Shareholding proportion percent: 10.0
Halcyon Tools and Engineering Co., Ltd.HALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · FDM Technology Co., Ltd. · Voting rights percent: 70.0 · Shareholding proportion percent: 70.0 · Mr. Kridsana Wattanasiri · Voting rights percent: 30.0 · Shareholding proportion percent: 30.0
Mastertech Diamond Products Co.HALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
Halcyon Technology Vietnam Co., Ltd.HALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 86.0 · Shareholding proportion percent: 86.0 · Mr. Tran Huu Quang · Voting rights percent: 6.0 · Shareholding proportion percent: 6.0 · Mr. Wanchai Akaraphokathanakul · Voting rights percent: 5.0 · Shareholding proportion percent: 5.0 · Mr. Vuong Duy Hoa · Voting rights percent: 3.0 · Shareholding proportion percent: 3.0
Halcyon Technology (Philippines) Inc.HALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 65.0 · Shareholding proportion percent: 65.0 · Mr. Tok Chee Chuan · Voting rights percent: 24.0 · Shareholding proportion percent: 24.0 · Mr. Hamilcar Azarias · Voting rights percent: 11.0 · Shareholding proportion percent: 11.0
Atek Precision Tools Inc. HALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · Halcyon Technology (Philippines) Inc. · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
Halcyon Technology Singapore Pte. Ltd.HALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 70.0 · Shareholding proportion percent: 70.0 · Ms. Ng Yuk Chin · Voting rights percent: 22.0 · Shareholding proportion percent: 22.0 · Mr. Tiah Shan Hsiang · Voting rights percent: 8.0 · Shareholding proportion percent: 8.0
Halcyon Technology (M) Sdn. Bhd. HALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 60.0 · Shareholding proportion percent: 60.0 · Mr. Chen Wai Leong · Voting rights percent: 40.0 · Shareholding proportion percent: 40.0
PT HTECH Tools IndonesiaHALCYON TECHNOLOGY PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · FDM Technology Co., Ltd. · Voting rights percent: 70.0 · Shareholding proportion percent: 70.0 · Mr. Alvin Arthur · Voting rights percent: 30.0 · Shareholding proportion percent: 30.0

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations1,221,767.641001,225,074.81001,048,824.76100
Manufacture and distribution of special (customized) cutting tools642,356.2852.58651,148.7553.15510,505.3548.67
Distribution of Cutting Tools504,209.9741.27499,328.8840.76462,854.544.13
Manufacture and distribution of tooling and metal fabricated parts75,201.396.1674,597.176.0975,464.917.2
OtherOthers

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue1,221,767.641001,225,074.81001,048,824.76100
DomesticDomestic637,335.7252.17611,781.7849.94534,910.4651
InternationalInternational584,431.9247.83613,293.0250.06513,914.349
PhilippinesPhilippines76,480.0713.0969,921.6411.457,975.7811.28
SingaporeSingapore127,482.9621.81138,824.9622.64110,151.3721.43
MalaysiaMalaysia44,924.47.6943,504.817.0947,000.139.15
IndonesiaIndonesia46,481.567.9539,518.616.4439,001.117.59
VietnamVietnam76,058.9713.0167,526.8111.0160,832.5511.84
United States of AmericaUnited States of America213,003.9536.45253,996.1941.42198,953.3638.71
Other countriesOthers

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 23294.62 · Description: Total other income · As of yesteryear: 23251.92 · As of year before yesteryear: 6359.67 · 1711 · As of year: 0.0 · Description: Other income from operations · As of yesteryear: 0.0 · As of year before yesteryear: 0.01712 · As of year: 23294.62 · Description: Other income not from operations · As of yesteryear: 23251.92 · As of year before yesteryear: 6359.671713 · Description: Share of profit

Product / Service Characteristics

Business Type

3114

Business Groups

Business GroupDescription
Special Cutting Tools

The Company and its subsidiaries in Vietnam and the United States are manufacturers of high-precision cutting tools to be used for machining metal to the desired shapes and sizes. Special Cutting Tool products can be categorized into 4 main groups according to the materials used for the cutting edge:

1.Polycrystalline Diamond (PCD) Cutting Tools

This product group is the Company's core product. It is a cutting tool with a cutting edge made of industrial synthetic diamond called Polycrystalline Diamond (PCD), a very dense and fine material with high hardness, making it the most wear-resistant. PCD has outstanding properties including good heat dissipation and longer tool life compared to carbide cutting tools commonly used in the industry. This product group is used to cut workpieces to achieve the desired quality, size, and accuracy. The surface of the workpiece will be shiny, and it requires less cutting force. It is suitable for cutting non-ferrous metals such as aluminum, brass, copper, and other materials such as graphite, carbon fiber reinforced polymers (CFRP), plastics, or wood. It is widely used in industries that require high precision, such as the Hard Disk Drive or other electronic parts manufacturing industries, aircraft parts manufacturing industries, medical equipment industries, as well as jewelry and watch industries.

The main products in this group consist of PCD Insert, PCD Boring Tools, PCD End Mill, PCD Drill, PCD Reamer, PCD Brazed Tools, and PCD Hollow Tools. The Company has continuously developed new products in this group, including:

  • PCD Chipbreaker - modified from the original PCD cutting tools to reduce the problem of long and tangled chips, allowing for longer running time and a better surface finish, free from scratches from chips. It can also increase the feed rate

  • PCD Monoblock - helps reduce working steps by combining multiple steps into a single tool, resulting in greater accuracy and saving time and costs for customers

  • PCD Face Mill with Indexable Inserts - face mill that can change inserts and adjust the height of the cutting edge; saving costs and allowing for roughing and finishing in a single step

In addition, the Company has been continuously developing high-end products. From the previous production of Veined PCD Tools (V-Tec), which are cutting tools with a serrated PCD cutting edge, and Solid-Headed PCD Tools (S-Tec), which have a solid PCD cutting edge, both of which have relatively high costs due to their complex manufacturing processes and limited raw materials, resulting in less design flexibility. The Company has developed Helix PCD Tools (H-Tec), which save production time, reduce production costs, and have better cutting performance compared to conventional PCD cutting tools. They also have a longer service life and a better surface finish. In 2019, the Company developed the High-Helix PCD End Mill (Z-Tec), an extension of the H-Tec product line, which is a new manufacturing innovation researched and developed by the Company. The Z-Tec product is much more flexible in terms of shape and design than the previous product because it can be angled more and has a longer cutting edge than the existing product. This allows it to cut workpieces with a more beautiful surface and reduce the force on the cutting edge. As a result, the Z-Tec product has a longer tool life than conventional PCD cutting tools. It can also be fed faster, reducing overall working time. The flexibility of the shape and design of the Z-Tec product has attracted a lot of interest from customers who want to improve the quality of their products and reduce both direct and indirect costs. The Company has filed patent applications for the Z-Tec product in Thailand and five other countries, namely the United States, Germany, Japan, South Korea, and Israel.

In 2024, the Company developed a Solid-headed PCD Drill (S-Tec Drill) with Coolant Hole(s) Through Tip, which has been granted a patent registration in Thailand and is in the process of filing for patent registration in other countries. The special feature of this type of drill is that it has a solid PCD head and coolant holes through the tip, which no other manufacturer has been able to produce before. Having coolant holes through the tip of the cutting tool maximizes the reduction of heat generated by friction during cutting. It also helps to evacuate the chips generated during cutting better than tools with coolant holes in the shank or tools without coolant holes. Therefore, it reduces wear and tear and increases tool life. In addition, it can reduce the heat generated inside the drilled hole, resulting in a decrease in the cooling rate of the drilled material, allowing for more precise control over the size of the drilled hole.

2. Single Crystal Diamond (SCD) Cutting Tools

This product group is a further development to meet the needs of a wider range of customers. SCD is the hardest material in the world, which can be natural diamond, Monocrystalline Diamond (MCD), or Chemical Vapor Deposition Diamond (CVD). It is suitable for cutting workpieces that require a particularly fine and polished surface or mirror finish. Due to its high cost and complex manufacturing process, the products in this group consist of SCD Insert, SCD Boring Bar, and SCD End Mill. It is suitable for cutting non-ferrous metals or other materials such as aluminum, brass, copper, and plastic. It can be used in the production of camera lenses, watch parts, jewelry, medical equipment parts, and more.

3. Polycrystalline Carbon Boron Nitride or PCBN/CBN Cutting Tools

This product group has high heat and wear resistance properties, suitable for cutting steel, cast iron, or other high hardness materials (more than 50 HRc). The main products in this group are CBN Insert and CBN Boring Tools, which are widely used in the automotive parts manufacturing industry or other machinery parts manufacturing industries.

4. Carbide Cutting Tools

This product group is manufactured to customer orders, unlike standard carbide cutting tools on the market; as it can control the shape, size, and accuracy according to customer requirements. Products in this group include Carbide Insert, Carbide Boring Tool, Carbide Drill, Carbide End Mill, Carbide Reamer, and Carbide Hollow Tools, which can be used in all industries.

Standard Cutting Tools

The Company has subsidiaries both domestically and internationally, operating as distributors of Special Cutting Tools (customized cutting tools) manufactured from Company's factories in Thailand, Vietnam, and the United States. Additionally, the Company acts as a distributor for Standard Carbide, Ceramic, PCD, and CBN Cutting Tools under various leading global brands such as Kyocera, Widia, Vargus, JJ Tools, and Ahno.

Tooling and Metal Fabricated Parts

The subsidiary, Halcyon Metal Co., Ltd. (HM), provides metal fabrication services according to customer requirements. The Company has classified its products into 3 categories as follows:

1. Cutting Tool Holders

These cutting tool holders help increase work efficiency and make the customer's work more convenient and faster. The cutting tool holders produced by the Company include holders for inserts and boring bars made from carbide or special grade steel. This product group can be used in various general industries and can also be used with the Company's PCD/SCD/PCBN Inserts. Each type of cutting tool holder is suitable for the production process of each customer, which has different characteristics. The Company has a team of specialized engineers to help design to suit the customer's use and with maximum efficiency.

2. Jigs & Fixtures

Jigs & Fixtures are used to hold workpieces in place to improve the accuracy and efficiency of the manufacturing process. These devices are used in the manufacturing of various parts, such as computer parts, automotive parts, and other mechanical parts. Well-designed and high-quality Jigs & Fixtures can help increase customer productivity by reducing production process time, improving workpiece quality control, and reducing waste in the production process. This is because quality Jigs & Fixtures offer greater clamping accuracy than conventional clamping methods, ensuring that workpieces undergoing the production process meet the same standards. The Company has expertise in designing and manufacturing work-holding devices to suit the specific products and production processes of different customers.

3. High Precision Parts

In addition to the above, the subsidiary HM also designs and manufactures other metal parts that require high dimensional control and accuracy, such as tool parts or machine spare parts to replace old or damaged parts, or parts for newly assembled machines, including machine structural parts. The Company also manufactures and designs auxiliary equipment for the production of customer parts, such as toggle clamps, diaphragm chucks, gear carriers, and indicator stands. The Company has over 20 years of experience in design and manufacturing; and has received orders for parts from small quantities to continuous mass production. In addition, the Company also manufactures tool parts for customers in the aircraft parts and medical device industries, with production controlled under the ISO 13485 standards, which is an international standard for quality control in the production of medical devices. The Company has prosthetic knee products that were designed and researched in collaboration with the Sirindhorn Center for Rehabilitation Medicine and the National Science and Technology Development Agency (NSTDA).


Intelligent Inventory Management System (iiMS)

Since 2023, the Company has begun testing the market for a comprehensive Intelligent Inventory Management System (iiMS) service for its customers. This decision stems from recognizing the importance of rapid delivery and collaborative production planning with customers. It builds upon the Company's existing consignment stock services, which have seen increasing customer demand. The iiMS includes providing the Company's products at customer locations for convenient and swift access, as well as offering a wider range of industrial products beyond the Company's own manufacturing capabilities. This approach aims to streamline customers' procurement processes, assist with production planning, and enhance customer trust; ultimately enabling the Company to provide more comprehensive services. Consequently, the Company anticipates an increase in market share and a long-term reduction in competitors' potential.

A key feature of iiMS is the utilization of automated vending machines in conjunction with inventory management software to provide a real-time online access to inventory data for both the users and the suppliers. The Company will stock these vending machines with its own products and/or products from other suppliers, allowing customers to instantly retrieve items as needed. Usage data will be processed to facilitate production planning and ensure timely delivery to meet customer demands.

Research & Development

Has R&D Policy (Y/N)

No

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

Assets Used in the Business

Permanent Assets — Description

The Company and its subsidiaries had the following main fixed assets used in business operations as of 31 December 2025 as follows: (Details are shown in Attachment 4.1)

1. Land (1 plot) with a value of 25.92 million baht, owned by Halcyon Metal Co., Ltd. (subsidiary HM) and is the location for the factory and office of subsidiary HM and Halcyon Technology PLC. (the Parent Company). The Parent Company leases the land for its building construction and leases some of the factory space from subsidiary HM to operate the business.

2. Buildings and Structures (4 units) with a total value of 104.67 million baht, consisting of

2.1 Three-storey factory and office building owned by the Parent Company

2.2 Four-storey factory and office building owned by subsidiary HM

2.3 One-storey factory and office building in Indonesia owned by subsidiary PT HTECH Tools Indonesia

2.4 One-storey factory and office building in the United States owned by subsidiary Mastertech Diamond Products Co.

3. Machinery and Equipment with a total value of 381.42 million baht, consisting of

3.1 Machinery and equipment used in the production process of the Parent Company and subsidiaries HM, MDP, HV (total value of 380.21 million baht)

3.2 Machinery and equipment used in the distribution of products of subsidiaries HP, FDM, HI, HENG, such as automatic vending machines (total value of 1.20 million baht)

4. Office Fixtures and Equipment with a total value of 5.35 million baht

5. Vehicles with a total value of 2.34 million baht

6. Utility Systems with a total value of 0.58 million baht

7. Construction in Progress (i.e. machinery during installation), all of which are owned by the Parent Company, with a total value of 26.20 million baht

Intangible Assets — Description

The Company and its subsidiaries had Important Intangible Assets used in the business operations as of 31 December 2025 as follows: (Details are shown in Attachment 4.2)

1. Market Share and Customer Relationships with total value of 5.92 million baht, which derived from the acquisition of subsidiaries:

1.1 Cutting Tool Business in the United States of subsidiary MDP, valued at 3.38 million baht

1.2 Carbide Cutting Tool Business in Thailand of subsidiary FDM, valued at 2.54 million baht

2. Computer Programs such as software and licenses, totaling 9.02 million baht

3. Patents and Petty Patents for the Parent Company's products, with a total value of 1.26 million baht.

Has Subsidiaries Investment Policy (Y/N)

Yes

Subsidiaries Investment Policy — Description

The Company has a policy to invest in subsidiaries or joint ventures that have the objective of conducting business that supports the Company's core business, which will result in increased revenue or profits for the Company; or businesses that are synergistic with the Company, which can support the Company's core business to be more comprehensive. The Company will invest in subsidiaries or joint ventures in a proportion that is sufficient for the Company to participate in the management and determine the direction of such businesses. The investment will be under the control and supervision of the Company's Board of Directors.

Marketing Policy & Competition

Reporting Mode

3117

Marketing Policy (Overall)

The Company focuses on providing comprehensive services to customers to maintain good relationships with its existing customer base and expand its customer base to new customers. The Company provides services to customers both before and after the sale of products; from designing customized cutting tools to meet customer needs by a team of specialized design engineers, including a marketing team with knowledge and experience to coordinate, consult, and advise on the use of the Company's products in the customer's production process to help reduce working time and production costs for customers. The Company also follows up and solves problems arising from tool application to continuously improve and develop products. The Company also provides sharpening or re-sharpening services for cutting tools in the event of wear and tear to reduce customer costs.

In addition, the Company has started using a comprehensive Intelligent Inventory Management System (iiMS), which builds on its previous consignment stock with customers. This will include providing the Company's products to be stored at the customer's premises for convenient and quick use by customers. It also includes offering a wider variety of industrial products in addition to the Company's own products. This is to reduce the burden of procurement/purchasing process for customers, as well as to help with production planning and increase customer confidence, supporting greater collaboration with customers, enabling the Company to provide more comprehensive customer service. This will result in the Company gaining more market share and reducing the potential of competitors in the long run.

In addition to sales and service, the Company also places importance on maintaining the quality of its products to meet standards. The Company is certified to ISO 9001 and ISO 13485 (for medical devices). The Company has a meticulous system of inspection and quality control of its products, from the selection and inspection of raw materials, the start of production to the final stage before delivery to customers. In some cases, test cuts are carried out beforehand to ensure that the products produced are of the quality and size specified by the customer, which helps to reduce problems when the customer actually uses them.

Industry & Competition (Overall)

The Company's target customer groups are manufacturers of various parts, especially those made of aluminum, stainless steel, composite materials, or cast iron. The main industries include those related to digital storage systems, such as manufacturers of hard disk drives (HDD) or coolant distribution unit (CDU) components, and the automotive and motorcycle parts manufacturing industry. Additionally, there are customers in other industries such as heavy equipment, aerospace parts manufacturers, camera/watch/jewelry parts manufacturers, as well as metal mold manufacturers, medical device manufacturers, oil drilling businesses, and industrial product distributors.

Automotive Industry

In 2025, the group's revenue from customers in the automotive industry was 491 million baht, accounting for 40% of total revenue. This revenue comprises 12% from the Parent Company and 28% from other subsidiaries. Customers in the automotive industry include manufacturers of automobile and motorcycle parts, both domestically and internationally. These includes manufacturers of alloy wheels, cylinder blocks, cylinder heads, fuel injectors, transmissions, brake systems, steering systems, pistons, connecting rods, turbos, and other components, which are both 1st tier and 2nd tier suppliers. Due to the highly competitive nature of this industry in terms of both price and service, the Company focuses on designing cutting tools that help reduce production costs for customers and emphasize better workpiece quality than those produced using conventional cutting tools in the market to attract new customers and retain existing ones.

Thailand's automotive industry is a prominent and potential industry in the ASEAN region. This is because Thailand has a strong automotive parts manufacturing base and a geographical advantage as the center of the ASEAN region. Moreover, Thailand has a good infrastructure, attracting major global automotive manufacturers to establish car assembly plants in the country. Coupled with the government's continuous promotion of the industry, related businesses have expanded accordingly. Although car production in Thailand has shown a downward trend in the past 1-2 years due to declining domestic demand and competition from Chinese electric vehicle (EV) manufacturers investing in Thailand, the Company's customer base of auto parts manufacturers has barely been affected and continue to increase orders. This is because the customers primarily manufacture aluminum casting parts, which can be used in both internal combustion engine vehicles and electric vehicles. The machining of aluminum parts requires a large quantity of the Company's PCD Cutting Tools, enabling revenue from the domestic automotive industry to grow steadily. Furthermore, customers who are auto parts manufacturers in the United States and motorcycle parts manufacturers in Vietnam and Indonesia also have the potential for continuous growth.

The Office of Industrial Economics expects that in 2026, there will be approximately 1.5 million cars produced in Thailand, increasing approximately 3.45% from the previous year; with approximately 40-45% for domestic sales and 55-60% for exports. Motorcycle production in 2026 is expected to increase by 5.26% from the previous year to approximately 2.0 million units; with the majority, approximately 85-90%, for domestic sales and approximately 10-15% for exports.

Digital Storage Industry

In 2025, the group's revenue from customers in industries related to digital storage systems, such as manufacturers of hard disk drives (HDD) or electronic components, was 312 million baht, increasing 7% from the previous year, accounting for 26% of total revenue. This revenue comprises 14% from the Parent Company and 11% from subsidiaries in Thailand, Singapore, Malaysia, and the Philippines.

The HDD industry is highly competitive in terms of price and technology, resulting in the relocation of production bases to countries with low production costs worldwide, especially in the Asian region and Thailand. Meanwhile, Thailand has policies to promote foreign investment, with the HDD industry classified as a significant industry and promoted by the Board of Investment (BOI). Entrepreneurs investing in this business receive various privileges, such as exemptions from import duties on machinery and exemptions on corporate income tax. As a result, Thailand is now a major global HDD production base, with large multinational companies like Western Digital and Seagate Technology establishing several assembly and component production plants in the country.

The main customers in this industry are HDD component manufacturers, including brand owners, 1st tier and 2nd tier suppliers. The Company's cutting tools can be used in the manufacturing of various HDD component such as base plates, or spindle components including shafts or hubs. The high-volume production of these components requires durable cutting tools to reduce downtime for tool changes, thereby reducing production costs. Moreover, the workpieces require high precision and quality as they are moving parts used for fast and accurate data reading and writing. The design of the Company's cutting tools effectively meets the needs of these component manufacturers.

HDD manufacturers are constantly developing technologies to increase the capacity and efficiency of HDDs. As a result, a single HDD unit may have more components, require higher precision, and demand a larger quantity or more complex cutting tool designs. This provides opportunities for the Company to offer new products to help reduce costs for customers, reduce competition from manufacturers who are slow to adapt to customer needs, and increase demand for the Company's high-end products. In terms of competition, the Company is a market leader in PCD cutting tools for HDD manufacturers in Thailand and the Southeast Asian market. Due to the limited number of manufacturers, complex production processes, and the need for highly specialized knowledge, the market share from other sellers is mainly from imports. This gives the Company an advantage in terms of cost, delivery speed, and other services such as custom design, on-site problem solving for customers, and continuous joint development of new products to reduce costs for customers. As a result, the Company has a strong advantage in terms of customer relationships.

However, Solid-State Drive (SSD) technology is a major competitor that has entered the HDD market, especially in the personal computer and mobile device markets. SSDs process data faster and are more durable than HDDs but still have a cost per TB that is about 5-8 times higher than HDDs, and are more vulnerable to data loss. Therefore, at the enterprise level, there is still a need for the use of both HDDs and SSDs. HDDs are primarily relied upon for storing massive amounts of data that do not require real-time access because HDDs offer a much better cost per TB than SSDs. Data that requires high speed or is frequently accessed will be stored on SSDs, which usually account for a much smaller proportion. This approach will enable organizations to benefit from both performance and cost efficiency.

In recent years, HDD component manufacturers have experienced a resurgence in demand due to the growth of Data Centers to support the growth of various cloud services, leading to a demand for massive data storage. Moreover, the growth of AI training centers expanded the demand for massive data storage, which led to an increased demand for Coolant Distribution Units (CDUs) as large capacity computing generates more heat in the system . CDUs are the most efficient cooling system option and can significantly reduce energy consumption. The Company has benefited from the increased demand for CDUs because it has a major customer who manufactures CDU components for the Digital Storage industry. The production of CDU components, such as various coupling components, is a high-volume operation that requires precision to prevent water leaks that could damage computer systems. This makes it suitable for using the Company's cutting tools. In the past year, the customer has significantly increased its production of CDU components, and they also have plans to invest in expanding production capacity. Therefore, the Company expects CDUs to be one of the products that will help drive revenue growth in this industry due to increasing demand and opportunities to reach other CDU component manufacturers in the future, both domestically and internationally.

Other Industries

In addition to the target customer groups from the two main industries mentioned above, the Company also sees business opportunities in the aerospace manufacturing industry. There are many parts that can utilize the Company's products, such as the fuselage, which is made of CFRP (Carbon-Fiber Reinforced Polymer), and various parts made of aluminum and titanium; including engine parts, landing gear parts, seat parts, and trolley parts. Currently, the Company has a customer base in this industry with continuous orders. However, in the past year, this segment accounted for only 6% of total revenue, which is considered very small compared to revenue from customers in other industries.

Nevertheless, the Company continues to seek growth opportunities in other industries to reduce its reliance on the automotive and digital storage industries. Currently, the group has a diverse customer base in industries such as heavy equipment, camera/watch/jewelry parts manufacturing, mold and die manufacturing, medical device manufacturing, and oil drilling.

Procurement of Products & Services

Reporting Mode

3117

Procurement (Overall)

The Company has a marketing team with knowledge and experience to act as a liaison and provide close customer service, including providing advice on usage, solving production problems, and helping to design tools that are suitable for customer use. For the Company, domestic sales are mainly made directly to manufacturers, with a small portion sold through distributors. Distributors will have expertise in accessing the market or specific customers, thus helping to distribute products and increase the Company's product distribution channels to customers.

For overseas sales, the Company will mainly rely on its subsidiaries for product distribution as the target customer groups have their production bases located throughout the ASEAN region, as well as the United States and neighboring countries. Selling its products through distributors in each country allows the Company to reach customer groups more easily and provide comprehensive customer service. The companies that are distributors of the Company's products will receive direct training from the Company on various products, including customer application problems, to be able to quickly troubleshoot for customers. In addition, distributing products through various distributors abroad also allows the Company to allocate the costs of storing inventory for customers and reduce delivery time to customers.

The Company has manufacturing plants in 3 countries worldwide. The head office factory is located in Bang Chan Industrial Estate, Bangkok, which includes Halcyon Technology PLC. (the Parent Company) that manufactures Special Cutting Tools; and Halcyon Metal Co., Ltd. (subsidiary HM) that manufactures tooling and metal fabricated products. In addition, there are 2 overseas subsidiaries' manufacturing plants in Vietnam (Hanoi) and the United States (Ohio). These factories focuses on the production of special cutting tools. All 3 plants will mainly produce according to customer orders and may partially produce some workpieces that are not yet fully finished in addition to the order quantity to save time and production costs for next time.

Raw Material Acquisition (Overall)

The Company purchases raw materials from both domestic and international suppliers. Therefore, the Company will set a production plan in order to plan the purchase of raw materials and consumables used in production to be ready and sufficient for production. Raw materials will be ordered approximately one month in advance, depending on the demand for raw materials and customer orders in each production period. In addition, the Company uses a consignment stock system with major raw material suppliers by having the suppliers stock raw materials at the Company. The Company will place an order when the raw materials are taken for use in production. This is to reduce the Company's raw material storage costs, reduce lead times for ordering goods, and reduce the risk of late deliveries, which will lead to delays in production and delivery of goods to customers.

Generally, the Company does not have a policy of purchasing goods from any particular supplier. Mostly, it relies on ordering from at least two or more main supplier in quoting to increase bargaining power. However, the decision to order raw materials does not depend solely on price. The Company considers quality, service, delivery, and payment terms together to obtain good quality raw materials that meet the standards for producing goods and benefit the Company in terms of cost management as much as possible. The raw materials used by the Company in production and the products for distribution are as follows:

(1) Raw Materials for the Production of Special Cutting Tools - The key raw materials in the production of cutting tools are carbide rods or blank inserts mainly purchased from Thailand, China, and USA; and materials used for the cutting edges such as PCD, PCBN, SCD, or natural diamonds mainly purchased from Thailand, USA, Korea, and China.

(2) Procurement of Goods for Distribution - The Company has subsidiaries that are distributors in 7 countries, both in Thailand and abroad in the Philippines, Singapore, Malaysia, Vietnam, Indonesia, and the United States. These subsidiaries distribute standard cutting tools from various leading brands worldwide, such as Kyocera, Widia, Vargus, JJ Tools, and Ahno. In addition, they may purchase products from the 3 manufacturing plants within the company group for distribution as well to support the production needs of customers in a comprehensive manner. Each subsidiary will order and stock goods for various customers as appropriate to ensure fast and timely delivery.

(3) Raw Materials for the production of Metal Fabricated Parts - The main raw materials in the production of various metal fabricated parts of subsidiary HM are steel, carbide, aluminum, stainless steel, plastic, etc., which are almost entirely purchased domestically.

(4) Products for iiMS (Inventory Information Management System) - Distributing products in the iiMS system will gain a marketing advantage if the Company can find products that meet customer needs at a reasonable cost. The products will be stored in vending machines for customers to conveniently pick up and use immediately. Various products may include cutting tools manufactured by the Company or other industrial products and consumables. The Company will seek suitable suppliers to be long-term business partners.

Production Policy (Overall)

* Since the Special Cutting Tools manufactured in the Company's factory vary in size, type, shape, and complexity; the calculation of production capacity may be based on small and simple tools, making the number of tools appear higher. The actual utilization rate may be a lot lower than the maximum production capacity of the machine due to the variety of job types and sizes, even though the machines are being used at full capacity.

Production Capacity (Overall)

ItemUnitUsedCapacity
Halcyon Technology Public Company Limited's production capacity for specialized metal cutting toolsPiece39.44539,656
Halcyon Metal Co., Ltd.'s production capacity for metal equipment and partsPiece69.34360,000
Mastertech Diamond Products Co.'s production capacity for specialized metal cutting toolsPiece42.6696,940
Halcyon Technology Vietnam Co., Ltd.'s production capacity for specialized metal cutting toolsPiece92.5571,000

Domestic/Overseas Purchase Proportion (Overall)

Raw MaterialSource CountryValue
PCD, PCBN, Carbide, Insert Blank, Steel, Stainless Steel, Aluminum, Finished Goods, etc.Thailand87,620,651
PCD, PCBN, Carbide, Steel, Stainless Steel, AluminumUnited States of America23,169,088
PCD, PCBN, Carbide, Insert Blank, etc.China32,534,432
Steel, Insert Blank, Finished GoodsVietnam13,605,772
PCD, PCBNSouth Korea3,917,850

Projects Under Construction

Has Projects Under Construction (Y/N)

No

Debentures & Bills of Exchange

Has Debentures (Y/N)

No

Convertible Securities

Has Convertible Securities (Y/N)

No

Contents